Aem 30-2131-XXX Brass Pressure Sensor Uživatelský manuál stáhnout pdf

AEM Performance Electronics

2205 126

th

Street Unit A, Hawthorne, CA. 90250

Phone: (310) 484-2322 Fax: (310) 484-0152

http://www.aemelectronics.com

Instruction Part Number: 10-2131 Rev C

 2012 AEM Performance Electronics

The model 30-2131-XXX family of pressure transducers is specifically designed for pressure measurements in automotive systems. The mechanical

connection is 1/8" Male NPT. Each sensor comes with a mating connector plug and pin kit. Sensors are not recommended for use with methanol.

Instruction Manual

P/N 30

-

2

13

1

-

XXX

Pressure

Sensor

s

Kit Contents

Part Number Sensor Connector

30-2131-15G 15 Psig Included

30-2131-30 30 Psia (2 Bar) Included

30-2131-50 50 Psia (3.5 Bar) Included

30-2131-75 75 Psia (5 Bar) Included

30-2131-100 100 Psig Included

30-2131-150 150 Psig Included

Spec

ifications:

Accuracy (Temp Included): < +/- 3% FS

Mounting Torque: 14.7 ft-lbf

Operating Temp: -20 to 105C

Burst Pressure: 2 X FS

Supply Voltage: 5V +/- 0.25V

Supply Current: 4.5 mA at 5VDC

Weight: < 60 Grams

Body Material: Brass

Wetted Material: 316L

Mechanical Connection: 1/8”NPT Male

Electrical Connection: Packard 3-Pin

Electrical Termination:

Signal Ground: Tap to Sensor/Signal Ground on EMS or AQ1

Sensor Power: Tap to Sensor Power +5V on EMS or AQ1

Signal: Connect to MAP/Input Channel on EMS or Input 1-8 on AQ1

1 2

Instruction Manual 1

Shrnutí obsahu

Strany 1 - Instruction Manual

AEM Performance Electronics 2205 126th Street Unit A, Hawthorne, CA. 90250 Phone: (310) 484-2322 Fax: (310) 484-0152 http://www.aemelectronics.com

Strany 2

IMPORTANT! The terminals are “Pull to Seat” meaning you must feed the wire through the connector housing BEFORE you crimp on the terminals. The wire

Komentáře k této Příručce

Žádné komentáře