Aem 30-5130 Analog Wideband UEGO Gauge Gasoline AFR Uživatelský manuál stáhnout pdf

Part Number 30-5130

Analog Wideband Air/Fuel Ratio Gauge

Figure 1. Wiring Schematic

AEM Gauge-Type UEGO Controller Parts

1 x 35-5130(B/W) UEGO Gauge Assembly

1 x 30-2001 UEGO Sensor

1 x 35-8535 Install Kit (O2 Bung with 6 Butt Connectors)

1 x 10-5130 Installation Instructions

1 x 35-3411 8-Pin Power Harness

1 x 35-3400 6-Pin Sensor Harness

1 x 35-8529S Silver Bezel

AEM Performance Electronics

2205 126

Street Unit A, Hawthorne, CA. 90250

Phone: (310) 484-2322 Fax: (310) 484-0152

http://www.aempower.com

Instruction Part Number: 10-5130 Rev 02

1 2 3 4 5 6 7 8

Part Number 30-5130 Analog Wideband Air/Fuel Ratio Gauge Figure 1. Wiring Schematic AEM Gauge-Type UEGO Controller Parts 1 x 35-5130(B/W) UEGO G

Page 2 INSTALLATION 1. Disconnect the negative battery cable. 2. Secure the gauge in a 2 1/16th” (52MM) mounting hole with the supplied bracket. 3.

Sensor Mounting A weld-in M18 X 1.5 boss is supplied for sensor installation. Mount the O2 sensor in the exhaust system at least 18 inches downstrea

Backlighting The Analog Wideband UEGO Gauge has 7 different backlight colors available to the end user, which closely match some of the more common f

# of Flashes Fault Corrective Action 1-6 Sensor Wiring and/or sensor Check sensor cable for broken wires/shorts 7 System voltage below 10 volt

AEM EMS P/N Lambda #1 Pin Lambda #2 Pin Sensor GND Pin 30-1000/1001/1002/1040/1042 D14 D16 D21 30-1010/1012/1050/1052 C16 A23 C18 30-1020/1060 D7 D1

Figure 5. F/IC Aux Gauge Setup Connect the WHITE Analog Output + wire to the Aux Gauge input and the BROWN Analog Output – wire

Page 8 Specifications Gauge Supply Current (nominal, peak) 1.3A, 2.7A peak Differential Analog Outputs 1 Measuring Range 8.5:1 to 18:1 AFR Ga

Žádné komentáře

Aem 30-5130 Analog Wideband UEGO Gauge Gasoline AFR Uživatelský manuál