Aem 30-5140M Analog Oil Transmission Water Temperature Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Pro auto Aem 30-5140M Analog Oil Transmission Water Temperature. AEM 30-5140M Analog Oil Transmission Water Temperature Metric Gauge User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 6
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
AEM Performance Electronics
2205 126
th
Street Unit A, Hawthorne, CA. 90250
Phone: (310) 484-2322 Fax: (310) 484-0152
http://www.aemelectronics.com
Instruction Part Number: 10-5140 Rev 01
2010 AEM Performance Electronics
Part Number 30-5140
Analog Style 100°F - 300°F Oil/Coolant/Trans Temperature Gauge
NOTE: Faceplate Configuration Instructions Included on Separate Sheet
Figure 1. Wiring Schematic
AEM Oil/Coolant/Trans Temperature Gauge Parts
1 x 35-5140 Temperature Gauge Assembly
1 x 35-2012 Temperature Sensor
1 x 35-4302 Install Kit (6 Butt Connectors)
1 x 10-5140 Installation Instructions
1 x 35-3411 8-Pin Power Harness
1 x 35-3413 3-Pin Sensor Harness
1 x 35-8529S Silver Bezel
1 x 35-8539W Trans Temp Faceplate, White
1 x 35-8539B Trans Temp Faceplate, Black
1 x 35-8541W Oil Temp Faceplate, White
1 x 35-8542W Coolant Temp Faceplate, White
1 x 35-8542B Coolant Temp Faceplate, Black
1 x Faceplate Configuration Instructions
1 x Paper Clip Needle Removal Tool
Zobrazit stránku 0
1 2 3 4 5 6

Shrnutí obsahu

Strany 1 - Part Number 30-5140

AEM Performance Electronics 2205 126th Street Unit A, Hawthorne, CA. 90250 Phone: (310) 484-2322 Fax: (310) 484-0152 http://www.aemelectronics.com

Strany 2 - INSTALLATION

Page 2 INSTALLATION 1. Disconnect the negative battery cable. 2. Secure the gauge in a 2 1/16th” (52MM) mounting hole with the supplied bracket. 3.

Strany 3

Page 3 Changing the Bezel and Faceplate The gauge kit comes with the black bezel and black faceplate installed. However, the kit also comes with a s

Strany 4

Page 4 Status Lights The AEM Temperature gauge has two status lights, see Figure 4. The status light on the left will turn on solid if the temper

Strany 5

Page 5 Analog Output The analog output from the AEM Temperature gauge is a linear dc voltage signal that varies from 0.5 Vdc at 100°F (40°C) to 4.5 V

Strany 6

Page 6 Specifications Gauge Supply Current 0.1 A Differential Analog Outputs 1 Measuring Range 100°F - 300°F 40°C - 148°C Operating Voltage (nominal

Komentáře k této Příručce

Žádné komentáře