Aem 30-3324 Wiring Harness for V2 Controller with Mult Uživatelský manuál stáhnout pdf (Strana 3)

Page 3

Pin Installation

Pin #

Description

Wire**

Color

Connection

Pump Ground

AWG

Orange

Connect to ground (black) wire of pump.

LED -

AWG

Gray

Connect to ground (black) wire of external LED.

LED +

AWG

Violet

Connect to positive (red) wire of external LED.

Solenoid -

AWG

Brown/White

1.5A Low Side output. Connect to optional flow control

solenoid.

Boost Safe LS Out

AWG

Green

1.7A Low Side output. Grounded when error condition exists.

Pump Power

AWG

Pink

Connect to the positive (red) wire of pump.

Ground

AWG

Black

Main ground connection, connect directly to battery ground.

Level Switch+

AWG

White

Connect to the white wire of the fluid tank level sensor*

Level Switch-

AWG

Brown

Connect to the black wire of the fluid tank level sensor*

Arm Switch +

AWG

Yellow

Arms injection system. Connect to a switched 12V source.

External Signal

AWG

Blue

Connect to External Signal. (0-5V, injector duty, MAF

frequency)

Power 12V

AWG

Red

Main Power Connection, connect directly to positive battery

terminal.

*Note: If fluid tank is equipped with previous generation level sensor, identified by having two black wires, then

pins 8 (white) and 9 (brown) may be connected to either of the two black sensor wires. The polarity is

unimportant.

**Note: If you need to extend the wires to mount the controller use at least 16 AWG wire for the pump and

controller ground circuits and 18 AWG for the remainder.

1 2 3 4 5

Komentáře k této Příručce

Žádné komentáře

Aem 30-3324 Wiring Harness for V2 Controller with Mult Uživatelský manuál Strana 3

Komentáře k této Příručce

Související produkty a manuály pro Pro auto Aem 30-3324 Wiring Harness for V2 Controller with Mult